Mfg: Mesta

Age: 1981; Used approx. 5 years

Straightening Speed:120 - 260 FPM

Product Capacity: Rail up to 175 lbs. at 155,000 psi yield strength;
H Beam up to 24"

EQUIPMENT:

Straightener Entry Table:
16 Rolls
Length: 120'

Straightener Entry and Turning Device:
Motor: 30/60 HP, 650/130 RPM, DC
Rotating Speed: 30 RPM max.
Rotation Angle: +/- 135 degrees

Horizontal Plane Straightener:
No. of Rolls: 9
Four (4) Top Rolls Individually Driven:
Motors: 50/100 HP, 575/1150 RPM, DC
Five (5) Bottom Rolls rotatedby 2.3/4.6 HP auxiliary motors to prevent skidding.
Motorized Adjustments: Vertical and Axial both top and bottom rolls
Features:
Anti-Friction bearings throughout
(3) Load Cells, one under each bottom roller shaft
Roll Diameter: 33" min., 36"max.
Vertical Centers: 37"min., 44"max.
Roll Pitch: 60"
Bottom Roll Vertical Adjustment: 7"max.
Vertical Plane Straightener:
No. of Rolls: 8
Four (4) Inboard Rolls Individually Driven:
Motors: 18.4/36.8 HP, 1850/1610 RPM, DC
Four (4) Outboard Rolls: Idlers
Motorized Adjustments: Horizontal, Axial, and Traverse
Features:
Anti-Friction bearings throughout
Roll Diameter: 24"min., 26"max.
Horizontal Centers: 23.25"min., 27.25"max.
Roll Pitch: 36"
Horizontal Adjustment:
Idler Rolls: 4"
Axial: All Rolls 3"

Gantry Roll Changing Rigs for both Horizontal and Vertical Plane:
(1) 15 Ton - Horizontal Plane
(1) 5 Ton - Horizontal Plane
(2) 3 Ton - Vertical Plane
Large Quantity of Spare Rolls
Lubrication System

Weight:
Horizontal Plane: 550,000 lbs.
Vertical Plane: 300,000 lbs.


agpowell@agpowell.com